Our product developers are constantly seeking new, intelligent solutions that improve the products. Several examples of such solutions are the in-house developed air filter, Active Air Filtration, and the DualCharge technology. Regarding diamond tools we are always working to improve the speed and life cycle of the tools, but also to give them an even more attractive design and find the optimal performance in relation to cost.
Diagrip™ is a revolutionary new technology for producing diamond segments. The technology involves a specific treatment of the diamonds so they are distributed optimally in the segment. Also, the diamonds are held in the segment for longer, so they are utilised maximally. The result is blades with superior cutting capacity, longer life and a smooth, rapid cut.
Dual Drive Technology™ is a unique patented twin motor arrangement with separate motors for grinding discs and planetary which enables total control of head speed and direction. This increases production rates, enhances operator control and allows for a wider range of applications, compared to any other planetary machine.
A unique filter technology consisting of three separate filter systems. The first, active – and maintenance-free – stage utilises the centrifugal force of the flywheel to separate 80–90% of the cutting dust from the intake air. The remaining dust gets caught in the next stage, an oil-impregnated adhesive filter. The third stage, a paper filter, forms an additional level of protection, to prevent the cutting dust from entering the engine. Active Air Filtration™ increases the service life of the engine and reduces downtime and service costs.
Our carburettor with built-in filter compensation, adjusts the fuel- air mixture, so the engine maintains maximum power even when the filters start to get clogged. Together with Active Air Filtration™, SmartCarb™ brings retained high power, better filter economy, lower fuel consumption and reduced emissions.
The secret behind the X-Torq™ technology is that you use twin flushing ducts: one for clean air and one for the fuel / air mixture.First, a barrier of clean air presses out the burnt gases, after which the fuel / air mixture is flushed in. The result is a more powerful engine, better fuel economy and a drop in emissions by fully 70%, compared to previous cutter generations. Also, the fuel mixture that passes the main bearings and crank bearings is more concentrated, so it lubricates the engine more effectively.
Several of our products are equipped with a Poly V-belt. It lasts longer than a conventional belt, requires less retensioning and provides increased product life and better power transmission.
The IntelliSeal blade spindle (patent pending) has four sealed radial bearings for strength and durability. Allows for a minimum of 500 hours maintenance intervals and a 1000 hour limited warranty.
Our products are developed with focus on reducing vibrations. A few examples are our power cutters with anti-vibration system, which considerably reduces handle vibrations and our floor saws with low vibration handles and special low-vibration engine mount.
As concrete hydrates and begins to set, it developes internal stresses. The objective in controlling shrinkage cracking is to relieve these stresses before they seek their own relief in the form of a random crack.Soff-Cut has the unique Ultra Early Entry dry-cutting system which controls random cracking by making the cut at an early stage.
The Husqvarna K 650 Cut-n-Break is a unique cutter with a unique method for cutting deep, up to 400 mm, at an extremely low tooling cost. The K 650 Cut-n-Break has a wide range of applications. Of course it’s ideal for use on window and door openings where you don’t want over cutting at the corners. It’s also very good for cutting pipes in pipe trenches, for sawing grooves for cabling and expansion joints, and for crack renovation.
Sawing with diamond wire is the most efficient way to remove large concrete constructions such as foundations and bridges, or to make holes in thick walls. The big advantage using our CS 2512 is that there is basically no limit to the depth that can be cut.
The Husqvarna Gyro is a modular, flexible system with several combination options, where the drill column can be turned 360°, for drilling at almost any angle. Much of the work time spent by an operator goes on setting up and transporting the machine, rig and tools. The Husqvarna Gyro drilling system minimises the workload for each hole drilled. The rig is easily secured between the floor and ceiling, and the ingenious gyro unit allows for drilling in virtually all directions.
The Kite 1 and Kite 2 segments for the Astro blade have been specially designed to facilitate the start of cutting, which means excellent cutting characteristics right from start. In addition, top quality diamonds and an increased cutting depth extend the blade’s service life.